Insta360 ONE X3 Dive Case (CINSBAQC)

Insta360 X3

Dive Case

Made for the depths.

Go deeper.

Its purpose-made waterproof build lets you shoot stunning shots as deep as 50 meters (164ft). Great for watersports and diving.

Get seamless underwater shots.

Thanks to its dome structure, your 360 shots come out seamless. This is down to the case compensating for water refraction- preventing warping and stitching issues.

How to use

1. Open the Case

Lift the buckle as shown below, then pull it down to remove from the hook. Repeat with the other buckle. When both sides are disengaged, open the Dive Case.

2. Insert the Anti-Fog Sheet

Ensure that the anti-fog sheet is inserted as shown below.
Note: When using third-party anti-fog sheets, ensure that the size is within 48.4 x 12.4 x 1.2mm. If the sheet is too large, it will cause water leakage and potentially damage the camera.

3. Insert the Camera

First, install the Dive Case’s upper cover.
Then install the Dive Case’s lower cover.

Note:

• When using the camera in water, please lock the touch screen to avoid accidental commands. Press the Power Button on the side to switch shooting modes. When inserting the camera, take care not to scratch the lenses.

4. Close the case

To close the Dive Case, latch the buckle onto the case’s hook and firmly push it down until it clicks.

Note:

• Ensure the Dive Case is firmly closed. Be sure that the parts of the Dive Case in contact with its rubber seal are free of dirt and dust.
• For the best results, keep the dome lenses of the Dive Case clean.

5. Attach the Stabilizer Ring

When connecting the Dive Case to other accessories, such as the floating hand grip, be sure to stick a stabilizer ring to the screw points.

6. Stitch

After shooting with the Dive Case, access the Insta360 X3 files via the Insta360 app or Insta360 Studio. The files will automatically be selected as Stitch for Dive Case.